ZigBee Aqara / Xiaomi Mi / Lumi
This plugin adds support for ZigBee devices from Aqara / Xiaomi Mi / Lumi using a ZigBee network controller in nymea.
Supported Things
In order to bring a ZigBee device into the nymea ZigBee network, the network needs to be opened for joining before you perform the device pairing instructions. The joining process can take up to 30 seconds. If the device does not show up, please restart the pairing process.
Note: if you you already added one of the following devices and you restart the pairing process while the network is closed, the device will leave the ZigBee network and the thing will be removed automatically.
- Aqara smart plug
- Aqara weather sensor
- Aqara door and window sensor
- Aqara motion sensor
- Aqara water leak sensor
- Aqara vibration sensor
- Aqara mini switch
- Aqara wall switch (Double key)
- Aqara single switch module T1
- Aqara single switch module T1
- Aqara TVOC Air Quality Monitor
- Xiaomi Mi wireless switch
- Xiaomi Mi door and window sensor
- Xiaomi Mi occupancy sensor
Pairing instructions
Open the ZigBee network for joining. Press and hold the pairing button with a needle until the LED starts blinking.