Stiebel Eltron
Connect nymea to Stiebel Eltron heat pumps.
This plugin communicates via Modbus/TCP with a Stiebel Eltron Internet-Service-Gateway (ISG). The ISG is usually connected to a WPM/WPM3/WPM3i heatpump controller which again is connected via CAN to the heatpump. Make sure the ISG firmware is up to date to ensure the Modbus/TCP connection is working. Contact Stiebel Eltron service for a remote update of your ISG.
Supported Things
- Stiebel Eltron Heatpump
Requirements
- The package
nymea-plugin-stiebeleltronmust be installed - Both devices must be in the same local area network.
- Modbus enabled (may conflict with an installed SMA EMI).