Huawei FusionSolar
Connects to a Huawei FusionSolar using Modbus TCP.
Huawei FusionSolar
The Huawei FusionSolar can be connected using the Huawei SmartDongle.
The following devices are supported:
- Huawei FusionSolar Inverter (all model supported by the SmartDongle)
- Huawei Meter (connected internally to the Inverter)
- Luna2000 battery units 1 and 2 if connected
Huawei SmartDongle
The SmartDongle can be used to communicate with the Huawei Solar Inverter. In order to allow nymea to read from the device please make sure following requirements are met:
- SmartDongle software version must be at least
SP133. - Connect the Huawei SmartDongle to the network
- Use the official FusonSolar App to enable Modbus TCP access for the Dongle (full access). You can find more informations here.
You can also contact the official Huawei support in order to get the update files and instructions, or get it from here.